Here is a list of MPLS providers, and some questions to help you compare them.
The best MPLS provider for you will not always be clear-cut, since everyone's needs are different. When choosing an MPLS provider, it will be helpful to start with a long-list of providers and apply some comparison questions to help you focus onto the ones that suit you best.
People often assume they need an MPLS network, but then decide that a hybrid network would better suit their needs. If you find yourself in that situation then you will need a slightly different long-list. This is because a major hybrid network benefit comes using multiple carriers and it is unlikely that a carrier will want to offer you circuits from a competitor!
For a Hybrid network then you may be better off using a Managed Service Provider. If you need help choosing an MPLS or Hybrid supplier, we would be delighted to have a quick informal chat to share what we've seen businesses like yours do before. Just drop us a line here.
If you're looking for a new network provider, this list of MPLS suppliers should get you started. It's not an exhaustive list, nor an endorsement), and we have concentrated on those who have a presence in the UK. If you'd like a more complete list, please do get in touch.
It first sight, choosing an MPLS provider can appear to be a difficult task; MPLS networks have been with us for many years, but they remain difficult to compare. This is partly because they're not all specified in the same way. More importantly, the things that make a the most practical difference to you may not be very clear from the specifications, or they may not be included in them at all.
Our experience is that a few common issues cause the most grief with an MPLS network. If you can get those right then you are likely to have a better experience with your next WAN, so it makes sense to consider potential MPLS suppliers in light of these challenges.
Look out for a downloadable spreadsheet link below, This spreadsheet provides questions and context to help you evaluate providers.
One last point...
If you're looking for a VPLS provider, (aka an e-lan provider) or even e-line then the information below is just as relevant!
Here are some questions to ask in order to choose an MPLS provider (or indeed, any WAN provider). Some of these relate particularly to Managed MPLS providers. However, they are still helpful if you're looking for a wires-only provider, because you will still need a supplier who is sensitive to, and can help with, these issues.
There is more to delivering an MPLS network than simply providing the circuits. Network performance is critical for the responsive applications that your users need to run your business, but many suppliers struggle to deliver performance beyond the systems they have sold.
You run a WAN so that your people can run applications, but you only get the benefits of the applications if they perform well for your users. So if your new MPLS network is to give you what you want, you’ll need to design it to support the users, the applications they’re using and your priorities.
Here are some questions you might ask:
Users want great performance from their applications, whether they’re in the HQ, a branch office or on the move. They are not concerned with your challenges; that some of your sites are in far-flung places, that you need to add or move sites at short notice, and that you have a budget. They expect good application performance and availability, regardless.
That's hard to deliver with a single technology and supplier, which is why many IT teams construct a hybrid network that integrates multiple technologies and carriers. Hybrid networks help improve performance, deployment speed and cost.
We can illustrate the benefit of a hybrid network by considering deployment. Deployment is a major irritation for an IT team, which can face considerable hurdles delivering new sites on time.
If you compare a number of MPLS providers, you will find that there is a wide range of deployment lead times for the same circuit types. One supplier might publish a 67 working day lead time for a fibre circuit while another might quote 100 days for the same thing. If your network can blend circuits from multiple carriers then you can make significant improvements in your deployment speed.
Similar variation can be found when comparing different technologies. For example, that 67 day lead time for an MPLS circuit might only be 33 for a VPLS circuit from a different supplier. So again, if your network can accommodate MPLS and VPLS then you can make significant improvements in your deployment speed.
Networks are generally a compromise between competing needs for performance, reliability, deployment speed, manageability and price. Hybrid networks that allow you to blend multiple providers and technologies will be better placed to meet all of your needs in all your locations, anywhere in the world.
So, ask your potential MPLS providers whether they will offer a hybrid network to match your speed, reliability and cost priorities to what is available at each location.
Businesses usually need sites deployed quickly, but most fixed line technologies take months to deliver. Unexpected delays can then wreak havoc with plans.
To make things worse, different carriers have wildly differing delivery times. To illustrate, see if you can guess how long it takes to install a fibre Ethernet circuit in the UK:
You may have noticed that one of those times (2 days) was markedly shorter than others. How is that possible?
Yes - it is possible to deliver circuits within a few days, using 4G Services. Many of our customers use our multi-SIM, multi-carrier 4G Rapid Site Deployment services to do just that.
But is that relevant to sites with large numbers of users? Surely it can't be fast enough?
Well if it's done properly it can support hundreds of users. See our guide to 4G WAN for more details. However, few MPLS providers are able to do this, so check whether they can before you short-list.
Here are a few questions to ask:
When you buy a new MPLS network there are many things that can take longer or be more problematic than you anticipated (or hoped).
The requirements of your network are often unclear without auditing the network and carefully analysing your planned applications. Deploying the network then requires a blend of planning and technical skills. Long-established MPLS service providers will often have complex legacy processes with a huge number of steps that increase the chance that problems arise. Sometimes they have multiple disparate processes and systems, with re-keying of information. Sometimes the size of the organisation makes it difficult to find people who know what's going on from end to end.
However, it is possible to limit pitfalls if you ask the right questions beforehand. Here are a few you might use:
See this post for more ideas about finding the best managed network provider.
Most suppliers can see when a link or a router is down. Some can see when it's over-utilised. However, when you have an application issue, what you really need is to be able to see which application, user or device is the root cause of the problem, and then follow the path of the application across the network.
You need to be able to get right to the heart of the problem, even when it is not with the network. A good MPLS service provider should help you do this.
What does good look like?
Here's an example of the sort monitoring portal you might seek:
Is it sufficient to have a monitoring portal?
Well no, not really. You need more.
Since the only reason you have a WAN is to help deliver applications to your users, it's vital that these applications perform well. However, finding the cause of a poorly-performing application can be extremely difficult. It can be very difficult to see what's going on within a mass of performance data.
How do you achieve it?
A critical feature of an MPLS WAN is that your provider can help you see the wood for the trees using tools such as Critical Path Monitoring. Here's an example of ours:
So, with this in mind, here are some questions you might ask:
The best MPLS providers will be easy to do business with, but not all seem to make life easy. Here are some questions you might ask them:
When you buy a new MPLS network you're going to be relying on it (and its supplier) for a long time. It's perhaps self-evident that it's important you like your supplier and can work well with them.
Your feelings towards a potential supplier are often a reflection of the experience you have with them. Thus, you may be able to anticipate how satisfied you would be with a supplier by gauging how well their existing customers like them. If other customers like them, there’s a good chance you will too. And vice versa.
How can you do that?
There are several ways, as shown in the following questions that you might ask them. For these questions, a supplier's readiness to answer, and the speed at which they answer, can be as insightful as the answer itself.
Many businesses buy a managed network rather than a 'wires only' one. This avoids the cost of hiring sufficient skilled resources to manage the WAN at every site.
A managed service provider may be able to monitor your whole estate, manage the network and any other devices you want, and let you manage the rest of the estate yourself. For example, a managed WAN provider might allow your LAN devices, servers and applications to be monitored while you manage them. They might act as a triage point and pass non-WAN faults to your resolver group while maintaining contact and support. It can also be reassuring to have a managed service provider on hand for when intractable performance problems (or worse) arise.
It would be prudent to assess a provider's ability to manage some or all of your estate, and to interwork with your teams. You can read more about managed network providers in this post: What does it take to be the best managed network provider (and why)?
Global enterprises need connectivity options across multiple countries. It is more complex to get WAN services abroad. It is also more difficult to deliver and configure the router into a complete MPLS solution.
Global MPLS providers will be able to source connectivity around the world. They will be able to deliver and set up the router and connect the new site seamlessly into your WAN.
Outside the UK, MPLS connectivity has traditionally been more expensive than internet circuits. Therefore, Global Enterprises will often use internet circuits to connect into their MPLS VPN. A good service provider will be able to do this for you. You should be able to get a complete global MPLS solution with a single helpdesk and a single bill.
An MPLS network is not the only possible solution for your next WAN. You may find that an Ethernet, public internet or hybrid network suits you better.
Have you considered SD WAN?
Think of SD WAN as an overlay, and therefore as a complement rather than an alternative to MPLS or other private VPN.
You may want to explore how to make sure your next WAN is SD WAN ready. You can read more in our post: SD WAN vs MPLS: SD WAN will replace MPLS (and other myths).
So you should ask prospective suppliers whether they can provide you with an SD WAN network, and whether they understand the benefits you would seek to get.
It's obvious that a service provider should provide secure networking and most people think that MPLS is fairly secure. However, you should still quiz a potential service provider about their network security!
Why is that?
Network security is critical because businesses are using their networks differently:
These two trends create a security hole because traffic is being routed differently. We need to plug that hole by moving security to where the traffic is.
Businesses are increasingly turning to WAN services based on SD WAN plus network security, combined into a service called SASE. SASE stands for Secure Access Service Edge, and a good WAN provider will be able to offer this if you need it. Find out more in our article: What is SASE?